S48734 (Boyd) | IMS EP QC Checklist

Enter Serial Number *

Enter Job Number *

Customer (AUTO)

Part Number (AUTO)

Description (AUTO)

1. FRAME IS PAINTED CORRECT COLOR AND MASKED PER THE DRAWING/ROUTER (Visual) *

2. ALL SURFACES PAINTED, NO BARE METAL (Visual) *

3. NO SCRATCHES OR DEBRIS IN PAINT OR METAL (Visual) *

4. FRAME IS ASSEMBLED PER THE DRAWING, BOM, AND SALES ORDER (Visual) *

5. CORRECT HARDWARE INSTALLED PER BOM/DRAWING (Visual) *

6. VERIFY ALL 3/8"x16 PEM NUTS ARE PRESENT AND FREE OF PAINT IN THREADS (36x) (Thread Gage) *

7. VERIFY ALL 8-32 PEM NUTS ARE PRESENT AND FREE OF PAINT IN THREADS (8x) (Thread Gage) *

8. VERIFY NO LOOSE HARDWARE (Visual) *

9. VERIFY FRAME WIDTH USING FIXTURE 9-02926. TWO TOP AND TWO BOTTOM STRUT LOCATIONS. THREE PLACES PER STRUT: FRONT, MIDDLE, BACK. (9-02926 Gage) *

10. VERIFY SIDE PANEL IS FLUSH WITH FRAME - LEFT SIDE (Visual) *

11. VERIFY SIDE PANEL IS FLUSH WITH FRAME - RIGHT SIDE (Visual) *

12. VERIFY NO GRINDING MARKS ON HINGES (Visual) *

13. FRONT AND REAR DOORS OPEN AND CLOSE PROPERLY (Visual) *

14. FRONT AND REAR DOORS LOCK AND UNLOCK PROPERLY (Visual) *

15. TOP PANEL INSTALLED AND SECURE (Visual) *

16. VERIFY RTV USED AROUND THE ENTIRE PERIMETER OF THE TOP PANEL. (Visual) *

17. VERIFY EYE BOLTS ARE INSTALLED (4x) (Visual) *

18. VERIFY GROUND CABLE NUTS ARE FASTENED SECURELY (4x) (Visual) *

19. VERIFY GROUND SYMBOLS ARE PRESENT (4X) (Visual) *

20. VERIFY CASTERS ARE INSTALLED (4X) (Visual) *

21. CHECK FOR FOD (LOOSE DEBRIS OR HARDWARE) IN BOTTOM OF FRAME (Visual) *

22. FRONT AND REAR DOOR LATCHED SECURELY PRIOR TO PACKING (Visual) *

23. KIMPAK PRESENT ON SHIPPING BRACKET (Visual) *