S47566 (Dedicated Computing) | IMS EP QC Checklist

Enter Serial Number *

Enter Job Number *

Customer (AUTO)

Part Number (AUTO)

Description (AUTO)

Rev. A

1. CHECK ALL CORNERS FOR PROPER WELDING (Visual) *

2. FRAME IS ASSEMBLED PER THE W.I., BOM, AND SALES ORDER (Visual) *

3. FRAME IS PAINTED AND MASKED PER THE DRAWING/ROUTER (Visual) *

4. CORRECT HARDWARE INSTALLED PER BOM/DRAWING (Visual) *

5. HARDWARE SECURE, NO LOOSE HARDWARE (Visual) *

6. SILK SCREEN APPEARANCE AND ADHESION ACCEPTABLE (Visual / Tape) *

7. PLUGS INSTALLED ON ALL OPEN HOLES (Visual) *

8. VERIFY PLASTISOL ADDED TO CAMS (Visual) *

9. VERIFY SIDE PANEL IS FLUSH WITH FRAME - LEFT SIDE (Visual) *

10. VERIFY SIDE PANEL IS FLUSH WITH FRAME - RIGHT SIDE (Visual) *

11. VERIFY NO GRINDING MARKS ON HINGES (Visual) *

12. VERIFY LACING STRIPS ARE PRESENT (2x) LEFT SIDE (Visual) *

13. VERIFY LACING STRIPS ARE PRESENT (2x) RIGHT SIDE (Visual) *

14. FRONT AND REAR DOOR OPEN AND CLOSE PROPERLY (Visual) *

15. TOP PANEL INSTALLED AND SECURE (Visual) *

16. NO SCRATCHES IN PAINT OR METAL (Visual) *

17. NO DEBRIS IN PAINT OR BOTTOM OF CABINET (Visual) *

18. CHECK INTERNAL WIDTH 3x: TOP, CENTER, BOTTOM (Gage) *

19. CHECK FRAME SQUARENESS (Square) *

20. CHECK CHANNEL WIDTH (Gage) *

21. VERIFY PDU KEYHOLES ON CABLE LACING STRIP ARE POINTING DOWN (Visual) *

22. VERIFY EYE BOLTS ARE INSTALLED (4x) (Visual) *

23. VERIFY CASTERS ARE INSTALLED (4x) (Visual) *

24. VERIFY EDGE KIT IS INSTALLED ON THE INSIDE FLANGE OF BASE (1x) (Visual) *

25. FRONT AND REAR DOOR LATCHED SECURELY PRIOR TO PACKING (Visual) *

26. VERIFY NO DENTS, SCRATCHES, OR SCUFFS ON EXTERIOR SURFACE OF ASSEMBLY (Visual) *

27. KIMPAK PRESENT ON SHIPPING BRACKET (Visual) *

28. VERIFY SCREWS ON SHIPPING BRACKET ARE TIGHT AND SEATED AGAINST BRACKET (Visual) *

29. PROTECTIVE TAPE PRESENT BETWEEN DOOR AND FRAME (Visual) *

File Upload - Front