Cubic 10057679 – Outdoor Cabinet Rev. D

Enter Serial Number *

Enter Job Number *

Customer (AUTO)

Part Number (AUTO)

Description (AUTO)

OP 20

10021369 - VERIFY CVM BASE IS SECURED WITH SCREWS AND WASHERS *

Qty: 1

92141A033 - INSTALL WASHER, FLAT, 1/2", Ø.531" ID, Ø1.250" OD *

Qty: 4

91478A726 - INSTALL SCREW-LAG, HEX HEAD, 1/2" X 3-1/2" *

Qty: 4

OP 30

732-CLEAR - VERIFY SILICONE ADHESIVE APPLIED AROUND BOLT HOLES AND BACK FLANGE. *

Qty: 1

OP 40

10053606 - VERIFY REAR WALL SECURED TO BASE WITH HARDWARE AND LOCTITE. *

Qty: 1

DIN933-A2-M10X20 - INSTALL CAP SCREW, M10X1.50 X 20, HEX HEAD *

Qty: 2

92148A210 - INSTALL WASHER, SPLIT-LOCK, *

Qty: 2

DIN125A-A2-M10 - INSTALL FLAT WASHER *

Qty: 2

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS. *

Qty: 2

OP 50

732-CLEAR - VERIFY RTV IS APPLIED AROUND THE MOUNTING BOLT HOLES AND ALONG THE SIDE FLANGE AND VERTICAL FLANGE OF REAR WALL FOR THE LEFT SIDE PANEL. *

Qty: 1

OP 60

10025379 - VERIFY HINGED SIDE PANEL IS SECURED TO REAR WALL AND BASE WITH HARDWARE *

Qty: 1

DIN933-A2-M10X20 - CAP SCREW, M10X1.50 X 20 INSTALLED *

Qty: 4

92148A210 - WASHER, SPLIT-LOCK INSTALLED *

Qty: 4

DIN125A-A2-M10 - 10MM FLAT WASHER INSTALLED *

Qty: 4

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 4

OP 70

732-CLEAR - VERIFY RTV IS APPLIED AROUND THE MOUNTING BOLT HOLES AND ALONG THE SIDE FLANGE AND VERTICAL FLANGE OF REAR WALL FOR THE RIGHT SIDE PANEL. *

Qty: 1

OP 80

10025489 - VERIFY SIDE PANEL IS SECURED TO BASE WITH HARDWARE AND LOCTITE. *

Qty: 1

DIN933-A2-M10X20 - CAP SCREW, M10X1.50 X 20 INSTALLED *

Qty: 4

92148A210 - WASHER, SPLIT-LOCK INSTALLED *

Qty: 4

DIN125A-A2-M10 - 10MM FLAT WASHER INSTALLED *

Qty: 4

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 4

OP 90

732-CLEAR - VERIFY RTV APPLIED AROUND THE MOUNTING BOLT HOLES AND ALONG ALONG THE TOP FLANGES OF THE REAR AND SIDE WALLS FOR THE TOP PANEL. *

Qty: 3

OP 100

VERIFY TOP CAP INSTALLED USING HARDWARE AND LOCTITE *

Qty: 0

10021370 - CVM TOP CAP 8 DEG SLOPE(OUTDOOR) *

Qty: 1

10012991 - CVM ENV KIT, VENTED TOP COVER *

Qty: 1

DIN933-A2-M10X20 - CAP SCREW, M10X1.50 X 20 INSTALLED *

Qty: 6

92148A210 - WASHER, SPLIT-LOCK INSTALLED *

Qty: 6

DIN125A-A2-M10 - 10MM FLAT WASHER INSTALLED *

Qty: 6

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 6

OP 140

RIVETS INSTALLED NEAR BOLTS TO PREVENT PANEL FROM MOVING *

Qty: 4

SSD64SSBS / 10028451 - 3/16" (.187) DOME HEAD BLIND (OPEN END) *

Qty: 0

OP 150

CHECK EXTERIOR SURFACES OF SIDES, BASE, REAR, AND TOP USING A SQUARE TO VERIFY THEY ALIGN AND ARE SECURE . ALL HARDWARE PRESENT AND TORQUED TO CORRRECT LBS, 150-176 IN-LBS. *

Qty: 6

DIN933-A2-M10X20 - CAP SCREW, M10X1.50 X 20 INSTALLED *

Qty: 6

92148A210 - WASHER, SPLIT-LOCK INSTALLED *

Qty: 6

DIN125A-A2-M10 - 10MM FLAT WASHER INSTALLED *

Qty: 6

OP 160

VERIFY ALL RIVETS HAVE BEEN USED TO SECURE PANELS. *

Qty: 52

SSD64SSBS / 10028451 - 3/16" (.187) DOME HEAD BLIND (OPEN END) *

Qty: 0

OP 170

VERIFY CROSSMEMBERS AND UPRIGHTS HAVE BEEN SECURED. LOCTITE HAS BEEN APPLIED TO ALL SCREW THREADS. SCREWS TORQUED TO 27-32 IN-LBS *

Qty: 10

BN5951-M5X10/10026210 - M5 X 10 Bossard Hex Screw *

Qty: 10

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 10

OP 180

VERIFY GUSSETS INSTALLED AND SECURED WITH HARDWARE. *

Qty: 4

10027644 - CORNER GUSSET *

Qty: 4

DIN6926-A2-M6 / 10028901 - NUT, M6 FLANGED *

Qty: 20

OP 190

VERIFY POWER MOUNTING BRACKET IS INSTALLED AND SECURE. *

Qty: 1

10025534 - CVM DC POWER MTG BRKT *

Qty: 1

DIN6921-A2-M8X16 / - M8 X 16 BOSSARD HEX FLANGE BOLT *

Qty: 4

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 4

OP 200

VERIFY BASE SHELF INSTALLED AND SECURED WITH HARDWARE. *

Qty: 1

10009857 - CVM BASE SHELF *

Qty: 1

92125A208 / 10028992 - M5 X 0.8 MM THREAD SCREW *

Qty: 4

BN5951-M4X8 / 10028819 - M4 X 8 BOSSARD HEX WASHER HEAD SCREW *

Qty: 5

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 9

OP 210

VERIFY COIN VAULT IS INSTALLED AND SECURED WITH HARDWARE *

Qty: 1

10025444-COIN-VAULT-SUB-ASSY - COIN VAULT - SHELF SUB-ASSEMBLY *

Qty: 1

BN5951-M5X10 / 10026210 - M5 X 10 BOSSARD HEX SCREW *

Qty: 8

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 8

OP 220

VERIFY BHU SHELF ASSEMBLY IS INSTALLED AND SECURED WITH HARDWARE. *

Qty: 1

10027190 - BHU SHELF ASSY - CVM *

Qty: 1

10012582 - COIN MECH CAGE ASSY *

Qty: 1

BN5951-M5X10 / 10026210 - M5 X 10 BOSSARD HEX WASHER HEAD MACHINE *

Qty: 8

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 8

OP 230

VERIFY COIN MECH ASSY IS INSTALLED AND SECURED WITH HARDWARE. *

Qty: 1

BN5951-M5X12 - M5 X 12 BOSSARD HEX WASHER HEAD *

Qty: 1

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 1

OP 240

VERIFY BACKBONE ASSEMBLY IS SQUARED UP WITH CABINET BASE AND SECURED WITH HARDWARE. *

Qty: 1

10066698 - CVM BHU SUPPORT BRACKET PRODUCT *

Qty: 1

BN5951-M5X10 / 10026210 - M5 X 10 BOSSARD HEX WASHER HEAD *

Qty: 3

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 3

OP 250

VERIFY MAGAZINE SUPPORT BRACKET IS INSTALLED AND SECURED WITH HARDWARE. *

Qty: 0

10012582 - COIN MECH CAGE ASSY *

Qty: 1

BN5951-M5X10 / 10026210 - M5 X 10 BOSSARD HEX SCREW *

Qty: 8

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 8

OP 260

10025444-BACKBONE - VERIFY LATCH (2X) IS FUNCTIONING PROPERLY ON BOTH BACKBONE AND BHU SHELF. *

Qty: 2

BN5951-M5X10 / 10026210 - M5 X 10 Bossard Hex Washer Head Machine *

Qty: 8

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 8

OP 270

VERIFY ALL GASKETS ARE PRESENT AND SECURE, NO BINDING. *

Qty: 6

10022602 - GASKET, HINGE *

Qty: 3

10023069 - UPPER SEGMENT, CVM GASKET *

Qty: 1

10022870 - LOWER SEGMENT, CVM GASKET, *

Qty: 1

10017966 - DOOR GASKET *

Qty: 1

OP 280

SEAL GASKETS - VERIFY ALL GASKETS INSTALLED ARE SEALED AT EACH SEAM JUNCTION WITH RTV AS SHOWN. KEEPS CAULK TO A MINIMUM AND CLEAN. *

Qty: 6

OP 290

VERIFY LATCHES ARE INSTALLED IN CORRECT ORIENTATION AND SECURED WITH HARDWARE. *

Qty: 4

10009863 - CVM, CABINET DOOR LATCH BLOCKS *

Qty: 4

10009864 - LATCH PLATE *

Qty: 4

DIN125A-A2-M8 - WASHER, FLAT, M8, *

Qty: 8

DIN127B-A2-M8 / 10028335 - WASHER, SPLIT LOCK *

Qty: 8

DIN933-A2-M8X70 / - SCREW Ø14.80MM OD, 2.00MM *

Qty: 8

91458A160 - LOCTITE 271 APPLIED TO THREAD ON SCREWS *

Qty: 8

OP 300

VERIFY DOOR IS PAINTED CORRECT COLOR AND TEXTURE, ALIGNED, AND SECURED WITH CORRECT HARDWARE, ENSURE BLUE LOCTITE USED. *

Qty: 1

10025662-SUB-ASSY - CVM, DOOR SHTMTL ASSY [ COMMON ] *

Qty: 1

DIN6923-A4-M8 - NUT, SER FLG, M8, DIN 6923, SST *

Qty: 12

91458A15 / 7003660 - ADHESIVE, LOCTITE 242, BLUE *

Qty: 12

OP 310

DOOR GAPS - VERIFY DOOR GAPS ARE UNIFORM. SIDE GAPS = 2.5mm, TOP AND BOTTOM GAP = 1.5mm. *

Qty: 4

TOP GAP AND BOTTOM GAP = 1.5mm *

Qty: 2

SIDE GAPS = 2.5mm *

Qty: 2

OP 320

VERIFY DOOR STAY IN ASSEMBLED CORRECLTY AND BLUE LOKTITE WAS USED. *

Qty: 1

10009988 - CVM, DOOR STAY, CABINET MOUNT *

Qty: 1

BN5951-M6X16 - M6 X 16 BOSSARD HEX WASHER HEAD SCREW *

Qty: 1

91458A15 / 7003660 - ADHESIVE, LOCTITE 271 , RED *

Qty: 1

10028728 - CVM DOOR STAY *

Qty: 1

OP 330

1012579 - SHELF ASSEMBLY - VERIFY SHELF IS SECURED BY A PIECE OF TAPE. *

Qty: 1

OP 340

PRODUCT LABEL - VERIFY PRODUCT LABEL IS PRESENT, INFORMATION IS CORRECT AND IN THE CORRECT LOCATION. *

Qty: 1

OP 350

732-CLEAR SILICONE - VERIFY ALL EXTERIOR SEAMS ARE FILLED WITH A UNIFORM BEAD OF SEALANT. *

Qty: 1

OP 360

8-00327-EB - VERIFY SHIPPING SUPPORTS ARE INSTALLED PROPERLY. *

Qty: 2

OP 360 & 370

8-00327-EB - VERIFY SHIPPING SUPPORTS ARE INSTALLED PROPERLY AND PART NUMBER AND REV ARE CORRECT. *

Qty: 2

10057679 Rev "" "" *

Qty: 0

OP 380

CLEAN EXTERIOR - VERIFY ALL EXTERIOR SURFACES ARE FREE OF FINGERPRINTS AND DIRT. *

Qty: 1

I acknowledge that the above information is complete and accurate (sign name) *

Clear Signature