S48612 (Synopsys) | IMS EP QC Checklist

Enter Serial Number *

Enter Job Number *

Customer (AUTO)

Part Number (AUTO)

Description (AUTO)

FINAL INSPECTION

Form M071 Rev C 11/10/2023

1. FRAME IS PAINTED CORRECT COLOR AND MASKED PER THE DRAWING/ROUTER (Visual) *

Accept
Reject
N/A

2. ALL SURFACES PAINTED, NO BARE METAL (Visual) *

Accept
Reject
N/A

3. NO SCRATCHES OR DEBRIS IN PAINT OR METAL (Visual) *

Accept
Reject
N/A

4. SILK SCREEN APPEARANCE AND ADHESION ACCEPTABLE (Visual/Tape) *

Accept
Reject
N/A

5. FRAME IS ASSEMBLED PER THE DRAWING, BOM, AND SALES ORDER (Visual) *

Accept
Reject
N/A

6. CORRECT HARDWARE INSTALLED PER BOM/DRAWING (Visual) *

Accept
Reject
N/A

7. HARDWARE IS TORQUED PER DRAWING, NO LOOSE HARDWARE (Torque Wrench) *

Accept
Reject
N/A

8. VERIFY SIDE PANEL IS FLUSH WITH FRAME - LEFT SIDE (Visual) *

Accept
Reject
N/A

9. VERIFY SIDE PANEL IS FLUSH WITH FRAME - RIGHT SIDE (Visual) *

Accept
Reject
N/A

10. VERIFY NO GRINDING MARKS ON HINGES (Visual) *

Accept
Reject
N/A

11. FRONT AND REAR DOOR OPEN AND CLOSE PROPERLY (Visual) *

Accept
Reject
N/A

12. VERIFY LOCTITE USED TO SECURE LEVELERS (Visual) *

Accept
Reject
N/A

13. TOP PANEL INSTALLED AND SECURE (Visual) *

Accept
Reject
N/A

14. VERIFY GROUND CABLE NUTS ARE FASTENED SECURLY (Visual) *

Accept
Reject
N/A

15. CHECK INTERNAL WIDTH 3X: TOP, CENTER, BOTTOM (Gage) *

Accept
Reject
N/A

16. CHECK CHANNEL WIDTH (Gage) *

Accept
Reject
N/A

17. 30.71+/-.060 (Caliper) *

Accept
Reject
N/A

18. 7.09+/-.060 (Caliper) *

Accept
Reject
N/A

19. CHECK SQUARENESS (Square) *

Accept
Reject
N/A

20. VERIFY EBD KIT IS PRESENT (Visual) *

Accept
Reject
N/A

21. CHECK FOR FOD (LOOSE DEBRIS OR HARDWARE) IN BOTTOM OF FRAME (Visual) *

Accept
Reject
N/A

22. FRONT AND REAR DOOR LATCHED SECURELY PRIOR TO PACKING (Visual) *

Accept
Reject
N/A