Atlas Ci4400 26004400 Assembly | IMS EP QC Checklist

Enter Serial Number *

Enter Job Number *

Customer (AUTO)

Part Number (AUTO)

Description (AUTO)

Frame Assembly

Levelers Locked and Set *

OK
Not OK

All Cleko Holes Plugged *

OK
Not OK

No Paint Defects Allowed On Frame *

OK
Not OK

No Paint On Threads *

OK
Not OK

Top Shelf Must Be Straight *

OK
Not OK

Tank Assembly

No Scratches Allowed On Inside of Tank *

OK
Not OK

Tank Insulation Not Straight. Must Not Have Wrinkles. *

OK
Not OK

Tank Must Be Clean and Free of Debris *

OK
Not OK

Minimal Oil Can On Top Ceiling of Tank. Press From Top and Bottom to Verify. *

OK
Not OK

Gasket Opening Joint to Be Top Middle *

OK
Not OK

Lower, Duct

No Gap Between Insulation Joints *

OK
Not OK

Duct, Heater

Make Sure Fiberglass Insulation is Cut Around Opening *

OK
Not OK

Assembly, Box Damper

Verify Squareness of Openings *

OK
Not OK

All Gaskets Present *

OK
Not OK

Damper Openings Must Be Cut *

OK
Not OK

Enclosure, Top, Curved

No Paint Imperfections Allowed On Upper Front Door. Scratches, Bad Touch Up Paint, Visible Dents Under Paint *

OK
Not OK

No Protective Film Allowed Under the Bezel On the Inside of the Window *

OK
Not OK

No Cracked Windows Allowed After Assembly *

OK
Not OK

Lock Does Not Align After Closing Door *

OK
Not OK

All Screws Present *

OK
Not OK

Inner Black Skin Installed Correctly Around 3 Windows *

OK
Not OK

Enclosure, Bottom, Curved

No Paint Imperfections Allowed On Bottom Door. Scratches, Bad Touch Up Paint, Visible Dents Under Paint *

OK
Not OK

No Uneven Gap On Door All Around in the Closed Position *

OK
Not OK

All front enclosures

Gap Must Be Even Around All Doors and Covers. Target .030" Taper (Difference Between Biggest Gap Reading Minus Smallest Gap Reading). *

OK
Not OK

Enclosure Right Side

No Paint Imperfections Allowed *

OK
Not OK

Enclosure, Bottom, Left

No Paint Imperfections Allowed *

OK
Not OK

Enclosure, Bottom, Back

No Paint Imperfections Allowed *

OK
Not OK

Enclosure, Front-Right

No Paint Imperfections Allowed *

OK
Not OK

Tray Assembly

No Paint Imperfections Allowed *

OK
Not OK

Enclosure, Top Left

No Paint Imperfections Allowed *

OK
Not OK

Kit, Reactors and Transformer

Verify All Components Are in the Correct Location *

OK
Not OK