S47480 (Northrop Grumman) | IMS EP QC Checklist

Enter Serial Number *

Enter Job Number *

Customer (AUTO)

Part Number (AUTO)

Description (AUTO)

FRAME IS PAINTED AND MASKED PER THE DRAWING/ROUTER *

NO SCRATCHES OR DEBRIS IN PAINT OR METAL *

SILK SCREEN APPEARANCE AND ADHESION ACCEPTABLE *

VERIFY SILK SCREEN (Upload Pictures)

Click or drag a file to this area to upload.

FRAME IS ASSEMBLED PER THE DRAWING, BOM, AND SALES ORDER *

CORRECT HARDWARE INSTALLED PER BOM/DRAWING *

VERIFY SPACER IS INSTALLED BETWEEN FRAME AND *FRONT* DOOR SENSOR. *

VERIFY REAR DOOR SENSOR IS INSTALLED. *

VERIFY DOOR SENSORS (2X) ARE SECURLY FASTENED (NOT LOOSE) *

HARDWARE IS TORQUED PER DRAWING, NO LOOSE HARDWARE *

VERIFY SIDE PANEL IS FLUSH WITH FRAME - LEFT SIDE *

VERIFY LEFT SIDE PANEL (Upload Pictures)

Click or drag files to this area to upload. You can upload up to 10 files.

VERIFY SIDE PANEL IS FLUSH WITH FRAME - RIGHT SIDE *

VERIFY RIGHT SIDE PANEL (Upload Pictures)

Click or drag files to this area to upload. You can upload up to 10 files.

VERIFY NO GRINDING MARKS ON HINGES *

FRONT AND REAR DOOR OPEN AND CLOSE PROPERLY *

FRONT AND REAR DOOR LATCHED SECURELY PRIOR TO PACKING *

TOP PANEL INSTALLED AND SECURE *

VERIFY GROUND CABLE NUT ARE FASTENED SECURLY *

CHECK INTERNAL WIDTH 3X: TOP, CENTER, BOTTOM *

CHECK CHANNEL WIDTH *

24.06" +/-.03" 2x PAGE 1 OF DRAWING *

1.85" +/-.03" 2x PAGE 1 OF DRAWING. *

CHECK SQUARENESS *

CHECK FOR FOD (LOOSE DEBRIS OR HARDWARE) IN BOTTOM OF FRAME *

KIMPAK PRESENT ON SHIPPING BRACKET *

Upload Pictures

Click or drag files to this area to upload. You can upload up to 10 files.

Comments

I acknowledge that the above information is complete and accurate (sign name) *

Clear Signature