S46681 (World Wide Technology) | IMS EP QC Checklist

Enter Serial Number *

Enter Job Number *

Customer (AUTO)

Part Number (AUTO)

Description (AUTO)

Verify Frame is Square *

Leg Levelers Present, Flush to Bottom (4x) *

Casters Installed (4x) Using Locknuts (16x) *

Locknut Fully Seated and Torqued per the W.I. *

Torqued Locknuts Identified with Marker (16x) *

Flexible Brushes Installed (3x) *

Top Panel Present *

3/8" Plastic Plug Present (12x) *

Push-in Round Plastic Plug Present (4x) *

Button Head Panel Fastener Present (16x) *

Kimpack Present on Shipping Brackets (2x) *

Power Panel Present (2x) and with Nut/Screw (8x) *

Mounting Channels Installed (4x) with Blanking Panels (12x) & Rivets (16x) *

Verify Mounting Channels are Secured with Unistrut Nuts and Screws (24x) *

Check Front Mounting Channel Width (3x Locations) *

Check Rear Mounting Channel Width (3x Locations) *

Check Front Mounting Channels with Dell Ready Rail (3x Locations) *

Check Rear Mounting Channels with Dell Ready Rail (3x Locations) *

Verify Side Panel Hardware Present and Functions *

Verify Side Panel Fits and Latches Properly *

Verify all French Door Hardware Present and Doors Function Properly *

Verify all Door Hardware Present and Door Functions Properly *

Upload Pictures

Click or drag files to this area to upload. You can upload up to 10 files.

Comments

I acknowledge that the above information is complete and accurate (sign name) *

Clear Signature